2024年5月14日，美国贸易代表办公室（USTR）发布了对华301关税四年期复审的结果，宣布在原有对华301关税基础上进一步提高对自华进口的电动汽车、锂电池、光伏电池、关键矿产、半导体以及钢铝、港口起重机、个人防护装备等产品(集中在七个行业)加征关税，关税提升至25%到100%。这一决定将对中美贸易关系及全球供应链产生深远影响。
根据USTR的公告，新的关税政策将从2024年8月1日起实施，具体内容包括：
对中国电动汽车征收100%的关税
对锂离子电动车电池征收25%的关税
对包括N95在内的口罩征收25%的关税
对注射器和针头征收50%的关税
对钴矿石和铝矿石等关键矿物征收25%的关税
对船岸起重机征收25%的关税
对太阳能电池征收50%的关税
对钢铁和铝制品征收25%的关税
此外，针对半导体产品，美国政府将在2025年1月1日起征收50%的关税；2026年1月1日起，将对锂离子非电动车电池征收25%的关税。
针对半导体产品，美国政府将在2025年1月1日起征收50%的关税；2026年1月1日起，将对锂离子非电动车电池征收25%的关税。USTR将于5月29日开始就关税的实施进行公众意见征询，截止日期为6月28日。
中国驻美大使馆表示，中国政府将“采取一切必要措施维护我方权益”，并称加征关税“不仅将破坏中美正常的经贸合作，还将大幅推高进口商品成本，给美国企业和消费者造成更大损失，让美国消费者付出更高代价”。
现在清单出来了，可以直接搜索产品编码前四位(PC端浏览器)。附件分为附件A、B、C。附件A：301关税的拟议修改；附件B：拟议的机械排除程序适用的产品线；附件C：拟议的太阳能制造设备排除情况。
附件A：301关税的拟议修改
请向上滑动阅览
|
Annex A |
|||
|
Battery Parts (Non-lithium-ion Batteries) |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
8507.90.40 |
Parts of lead-acid storage batteries, including separators therefor |
25% |
2024 |
|
Electric Vehicles |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
8702.40.31 |
Motor vehicles w/electric motor, to transport 16 or more persons, incl driver |
100% |
2024 |
|
8702.40.61 |
Motor vehicles w/electric motor, to transport 10 to 15 persons, incl driver |
100% |
2024 |
|
8702.90.31 |
Motor vehicles nesoi, to transport 16 or more persons, incl driver |
100% |
2024 |
|
8702.90.61 |
Motor vehicles nesoi, to transport 10 to 15 persons, incl driver |
100% |
2024 |
|
8703.60.00 |
Motor vehicles to transport persons, w/spark- ign. IC recip. piston engine & elec motor capable of charge by plug to external source |
100% |
2024 |
|
8703.70.00 |
Motor vehicles to transport persons, w/diesel engine & elec motor capable of charge by plug to external source |
100% |
2024 |
|
8703.80.00 |
Motor vehicles to transport persons, w/electric motor for propulsion |
100% |
2024 |
|
87039001 |
Motor vehicles to transport persons, nesoi |
100% |
2024 |
|
Facemasks |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
6307.90.9845 |
N95 Respirators of Textiles |
25% |
2024 |
|
6307.90.9850 |
Respirators of Textiles, Other than N95 |
25% |
2024 |
|
6307.90.9875 |
Face Masks of Textiles, Other than Disposable |
25% |
2024 |
|
Lithium-ion Electrical Vehicle Batteries |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
8507.60.0010 |
Lithium-ion batteries of a kind used as the primary source of electrical power for electrically powered vehicles of subheadings 870340, 870350, 870360, 870370 or 870380 |
25% |
2024 |
|
Lithium-ion Non-electrical Vehicle Batteries |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
8507.60.0020 |
Lithium ion batteries: Other |
25% |
2026 |
|
Medical Gloves |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
4015.12.10 |
Medical or surgical gloves of vulcanized rubber other than hard rubber |
25% |
2026 |
|
Natural Graphite |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
2504.10.10 |
Natural graphite, crystalline flake (not including flake dust) |
25% |
2026 |
|
2504.10.50 |
Natural graphite in powder or flakes (other than crystalline flake) |
25% |
2026 |
|
2504.90.00 |
Natural graphite, other than in powder or in flakes |
25% |
2026 |
|
Other Critical Minerals |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
2602.00.00 |
Manganese ores and concentrates including ferruginous manganese ores & concentrates with manganese content over 20% calculated on dry weight |
25% |
2024 |
|
2605.00.00 |
Cobalt ores and concentrates |
25% |
2024 |
|
2606.00.00 |
Aluminum ores and concentrates |
25% |
2024 |
|
2608.00.00 |
Zinc ores and concentrates |
25% |
2024 |
|
2610.00.00 |
Chromium ores and concentrates |
25% |
2024 |
|
2611.00.60 |
Tungsten concentrates |
25% |
2024 |
|
2825.90.30 |
Tungsten oxides |
25% |
2024 |
|
2841.80.00 |
Tungstates (wolframates) |
25% |
2024 |
|
2844.41.00 |
Tritium and its compounds, alloys, dispersions, ceramic products and mixtures thereof |
25% |
2024 |
|
2844.42.00 |
Actinium, californium, curium, einsteinium, gadolinium, polonium, radium, uranium & their compounds, alloys, dispersions, ceramic products & mixtures |
25% |
2024 |
|
2844.43.00 |
Other radioactive elements, isotopes, compounds, nesoi; alloys, dispersions, ceramic products and mixtures thereof |
25% |
2024 |
|
2844.44.00 |
Radioactive residues |
25% |
2024 |
|
2849.90.30 |
Tungsten carbide |
25% |
2024 |
|
7202.60.00 |
Ferronickel |
25% |
2024 |
|
7202.93.40 |
Ferroniobium containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon |
25% |
2024 |
|
7202.93.80 |
Ferroniobium, nesoi |
25% |
2024 |
|
7901.11.00 |
Zinc (o/than alloy), unwrought, containing o/99.99% by weight of zinc |
25% |
2024 |
|
7901.12.10 |
Zinc (o/than alloy), unwrought, casting-grade zinc, containing at least 97.5% but less than 99.99% by weight of zinc |
25% |
2024 |
|
7901.12.50 |
Zinc (o/than alloy), unwrought, o/than casting- grade zinc, containing at least 97.5% but less than 99.99% by wt. of zinc |
25% |
2024 |
|
7901.20.00 |
Zinc alloy, unwrought |
25% |
2024 |
|
8001.10.00 |
Tin (o/than alloy), unwrought |
25% |
2024 |
|
8001.20.00 |
Tin alloy, unwrought |
25% |
2024 |
|
8101.10.00 |
Tungsten, powders |
25% |
2024 |
|
8103.20.00 |
Tantalum, unwrought (including bars and rods obtained simply by sintering); tantalum powders |
25% |
2024 |
|
8112.21.00 |
Chromium, unwrought; chromium powders |
25% |
2024 |
|
8112.92.30 |
Indium, unwrought; indium powders |
25% |
2024 |
|
Permanent Magnets |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
8505.11.00 |
Permanent magnets and articles intended to become permanent magnets after magnetization, of metal |
25% |
2026 |
|
Semiconductors |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
8541.10.00 |
Diodes, other than photosensitive or light- emitting diodes |
50% |
2025 |
|
8541.21.00 |
Transistors, other than photosensitive transistors, with a dissipation rating of less than 1 W |
50% |
2025 |
|
8541.29.00 |
Transistors, other than photosensitive transistors, with a dissipation rating of 1 W or more |
50% |
2025 |
|
8541.30.00 |
Thyristors, diacs and triacs, other than photosensitive devices |
50% |
2025 |
|
8541.49.10 |
Other photosensitive semiconductor diodes, other than light-emitting |
50% |
2025 |
|
8541.49.70 |
Photosensitive transistors |
50% |
2025 |
|
8541.49.80 |
Photosensitive semiconductor devices nesoi, optical coupled isolators |
50% |
2025 |
|
8541.49.95 |
Other photosensitive semiconductor devices, other than diodes or transistors, nesoi |
50% |
2025 |
|
8541.51.00 |
Other semiconductor-based transducers, other than photosensitive transducers |
50% |
2025 |
|
8541.59.00 |
Other semiconductor devices, other than semiconductor-based transducers, other than photosensitive devices, nesoi |
50% |
2025 |
|
8541.90.00 |
Parts of diodes, transistors, similar semiconductor devices, photosensitive semiconductor devices, LED's and mounted piezoelectric crystals |
50% |
2025 |
|
8542.31.00 |
Electronic integrated circuits: processors and controllers |
50% |
2025 |
|
8542.32.00 |
Electronic integrated circuits: memories |
50% |
2025 |
|
8542.33.00 |
Electronic integrated circuits: amplifiers |
50% |
2025 |
|
8542.39.00 |
Electronic integrated circuits: other |
50% |
2025 |
|
8542.90.00 |
Parts of electronic integrated circuits and microassemblies |
50% |
2025 |
|
Ship-to-Shore Cranes |
|||
|
Proposed Product Description |
Rate |
Timing |
|
|
Ship-to-shore gantry cranes, configured as a high- or low- profile steel superstructure and designed to unload intermodal containers from vessels with coupling devices for containers,including spreaders or twist-locks (classified in subheading 8426.19.00) |
25% |
2024 |
|
|
Solar Cells (whether or not assembled into modules) |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
8541.42.00 |
Photovoltaic cells, not assembled in modules or made up into panels |
50% |
2024 |
|
8541.43.00 |
Photovoltaic cells assembled in modules or made up into panels |
50% |
2024 |
|
Steel and Aluminum Products |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
7206.10.00 |
Iron and nonalloy steel ingots |
25% |
2024 |
|
7206.90.00 |
Iron and nonalloy steel in primary forms (o/than ingots) |
25% |
2024 |
|
7207.11.00 |
Iron or nonalloy steel semifinished products, w/less than 0.25% carbon, w/rect. cross sect.(incl. sq.), w/width less than twice thickness |
25% |
2024 |
|
7207.12.00 |
Iron or nonalloy steel semifinished products, w/less than 0.25% carbon, w/rect. cross sect. (exclud. sq.), nesoi |
25% |
2024 |
|
7207.19.00 |
Iron or nonalloy steel semifinished products, w/less than 0.25% carbon, o/than w/rect. cross section |
25% |
2024 |
|
7207.20.00 |
Iron or nonalloy steel semifinished products, w/0.25% or more of carbon |
25% |
2024 |
|
7208.10.15 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/patterns in relief, in coils, pickled, not clad/plated/coated |
25% |
2024 |
|
7208.10.30 |
Iron/nonalloy steel, width 600mm+,hot-rolled flat-rolled product, in coil,w/pattern in relief, w/thick 4.75mm+,not pickld,not clad/plated/coatd |
25% |
2024 |
|
7208.10.60 |
Iron/nonalloy steel,width 600mm+,hot-rolled flat-rolled product,in coil,w/pattern in relief,w/thick <4.75mm,not pickld,not clad/plated/coatd |
25% |
2024 |
|
7208.25.30 |
Nonalloy hi-strength steel, width 600mm+, hot- rolled flat-rolled products, in coils, w/thick 4.75mm+, pickled, not clad/plated/coated |
25% |
2024 |
|
7208.25.60 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.7mm or more, pickled, not clad/plated/coated |
25% |
2024 |
|
7208.26.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or mor but less 4.75mm, pickled, not clad/plated |
25% |
2024 |
|
7208.27.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, pickled, not clad/plated/coated |
25% |
2024 |
|
7208.36.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick o/10mm, not pickled/clad/plated/coated |
25% |
2024 |
|
7208.37.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 4.75mm or more & n/o 10mm, not pickled/clad/plated |
25% |
2024 |
|
7208.38.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick 3mm or more & less 4.75mm, not pickld/clad/plated |
25% |
2024 |
|
7208.39.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, in coils, w/thick less than 3mm, not pickled/clad/plated/coated |
25% |
2024 |
|
7208.40.30 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief, not coils, w/thick 4.75 or more, n/clad/plated/coated |
25% |
2024 |
|
7208.40.60 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, w/pattern in relief, not coils, w/thick < 4.75mm, not clad/plated/coated |
25% |
2024 |
|
7208.51.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not in coils, w/thick o/10mm, not clad/plated/coated |
25% |
2024 |
|
7208.52.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 4.75mm+ but n/o 10mm, not clad/plated/ |
25% |
2024 |
|
7208.53.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick 3mm+ but < 4.75mm, not clad/plated/coated |
25% |
2024 |
|
7208.54.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, neosi, not in coils, w/thick less than 3mm, not clad/plated/coated |
25% |
2024 |
|
7208.90.00 |
Iron/nonalloy steel, width 600mm+, hot-rolled flat-rolled products, nesoi, not clad/plated/coated |
25% |
2024 |
|
7209.15.00 |
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 3mm+, not clad/plated/coated |
25% |
2024 |
|
7209.16.00 |
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated |
25% |
2024 |
|
7209.17.00 |
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.5mm or more but n/o 1mm, not clad/plated/coated |
25% |
2024 |
|
7209.18.15 |
Nonalloy hi-strength steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.5mm, not clad/plated/coated |
25% |
2024 |
|
7209.18.25 |
Nonalloy steel(blackplate), width 600mm+, cold-rolled flat-rolled products, in coils, w/thick less than 0.361mm, not clad/plated/coated |
25% |
2024 |
|
7209.18.60 |
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, in coils, w/thick 0.361mm+ but less 5mm, not clad/plated/coated |
25% |
2024 |
|
7209.25.00 |
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 3mm or more, not clad/plated/coated |
25% |
2024 |
|
7209.26.00 |
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick o/1mm but less than 3mm, not clad/plated/coated |
25% |
2024 |
|
7209.27.00 |
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick 0.5mm+ but n/o 1mm, not clad/plated/coated |
25% |
2024 |
|
7209.28.00 |
Iron/nonalloy steel, width 600mm+, cold-rolled flat-rolled products, not in coils, w/thick less than 0.5mm, not clad/plated/coated |
25% |
2024 |
|
7209.90.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, not clad/plated/coated, nesoi |
25% |
2024 |
|
7210.11.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with tin, w/thick. 0.5 mm or more |
25% |
2024 |
|
7210.12.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with tin, less than 0.5 mm thick |
25% |
2024 |
|
7210.20.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with lead, including terneplate |
25% |
2024 |
|
7210.30.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, electrolytically plated or coated with zinc |
25% |
2024 |
|
7210.41.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with zinc (other than electrolytically), corrugated |
25% |
2024 |
|
7210.49.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with zinc (other than electrolytically), not corrugated |
25% |
2024 |
|
7210.50.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with chromium oxides or with chromium and chromium oxides |
25% |
2024 |
|
7210.61.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with aluminum-zinc alloys |
25% |
2024 |
|
7210.69.00 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated with aluminum o/than aluminum-zinc alloy |
25% |
2024 |
|
7210.70.30 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, painted/varnished or coated w/plastic but not plated/coated or clad w/metal |
25% |
2024 |
|
7210.70.60 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, painted/varnished or coated w/plastic, nesoi |
25% |
2024 |
|
7210.90.10 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, clad |
25% |
2024 |
|
7210.90.60 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, electrolytically coated or plated with base metal, nesoi |
25% |
2024 |
|
7210.90.90 |
Iron/nonalloy steel, width 600mm+, flat-rolled products, plated or coated, nesoi |
25% |
2024 |
|
7211.13.00 |
Iron/nonalloy steel, width less th/600mm, hot- rolled flat-rolled universal mill plate, not clad/plated/coated |
25% |
2024 |
|
7211.14.00 |
Iron/nonalloy steel, width less th/600mm, hot- rolled flat-rolled products, nesoi, w/thick of 4.75mm or more, not clad/plated/coated |
25% |
2024 |
|
7211.19.15 |
Nonalloy hi-strength steel, width less th/300mm, hot-rolled flat-rolled products, not clad/plated/coated |
25% |
2024 |
|
7211.19.20 |
Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick o/1.25 mm but n/o 4.75 mm, n/clad/plated/coated |
25% |
2024 |
|
7211.19.30 |
Iron/nonalloy steel, neosi, width less th/300mm, hot-rolled flat-rolled products, w/thick 1.25mm or less, not clad/plated/coated |
25% |
2024 |
|
7211.19.45 |
Nonalloy hi-strength steel, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not clad/plated/coated |
25% |
2024 |
|
7211.19.60 |
Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, pickled, not clad/plated/coated |
25% |
2024 |
|
7211.19.75 |
Iron/nonalloy steel, neosi, width 300mm+ but less th/600mm, hot-rolled flat-rolled products, not pickled, not clad/plated/coated |
25% |
2024 |
|
7211.23.15 |
Nonalloy hi-strength steel, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/1.25mm, not clad/plated/coated |
25% |
2024 |
|
7211.23.20 |
Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/1.25mm, not clad/plated/coated |
25% |
2024 |
|
7211.23.30 |
Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick o/0.25mm n/o 1.25mm, not clad/plated |
25% |
2024 |
|
7211.23.45 |
Iron/nonalloy steel, nesoi, width less th/300mm, cold-rolled flat-rolled, <0.25% carbon, w/thick n/o 0.25mm, not clad/plated/coated |
25% |
2024 |
|
7211.23.60 |
Iron/nonalloy steel, nesoi, width 300mm+ but less th/600mm, cold-rolled flat-rolled, <0.25% carbon, not clad/plated/coated |
25% |
2024 |
|
7211.29.20 |
Iron/nonalloy steel, width less th/300mm, cold- rolled flat-rolled, w/0.25% or more carbon,w/thick o/0.25mm, not clad/plated/coated |
25% |
2024 |
|
7211.29.45 |
Iron/nonalloy steel, width less th/300mm, cold- rolled flat-rolled, w/0.25% or more carbon,w/thick 0.25mm or less, not clad/plated/coated |
25% |
2024 |
|
7211.29.60 |
Iron/nonalloy steel, width 300mm+ but less th/600mm, cold-rolled flat-rolled, w/0.25% or more carbon, not clad/plated/coated |
25% |
2024 |
|
7211.90.00 |
Iron/nonalloy steel, width less th/600mm, flat- rolled further worked than cold-rolled, not clad, plated or coated |
25% |
2024 |
|
7212.10.00 |
Iron/nonalloy steel, width less th/600mm, flat- rolled products, plated or coated with tin |
25% |
2024 |
|
7212.20.00 |
Iron/nonalloy steel, width less th/600mm, flat- rolled products, electrolytically plated or coated with zinc |
25% |
2024 |
|
7212.30.10 |
Iron/nonalloy steel, width less th/300mm, flat- rolled products, plated/coated with zinc (other than electrolytically), w/thick o/0.25mm |
25% |
2024 |
|
7212.30.30 |
Iron/nonalloy steel, width less th/300mm, flat- rolled products, plated/coated w/zinc (other than electrolytically), w/thick 0.25mm or less |
25% |
2024 |
|
7212.30.50 |
Iron/nonalloy steel, width 300+ but less th/600mm, flat-rolled products, plated or coated with zinc (other than electrolytically) |
25% |
2024 |
|
7212.40.10 |
Iron/nonalloy steel, width less th/300mm, flat- rolled products, painted, varnished or coated w/plastic |
25% |
2024 |
|
7212.40.50 |
Iron/nonalloy steel, width 300+ but less th/600mm, flat-rolled products, painted, varnished or coated w/plastic |
25% |
2024 |
|
7212.50.00 |
Iron/nonalloy steel, width less th/600mm, flat- rolled products, plated or coated nesoi |
25% |
2024 |
|
7212.60.00 |
Iron/nonalloy steel, width less th/600mm, flat- rolled products, clad |
25% |
2024 |
|
7213.10.00 |
Iron/nonalloy, concrete reinforcing bars and rods in irregularly wound coils, hot-rolled |
25% |
2024 |
|
7213.20.00 |
Free-cutting steel, bars and rods in irregularly wound coils, hot-rolled |
25% |
2024 |
|
7213.91.30 |
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, n/tempered/treated/partly mfd |
25% |
2024 |
|
7213.91.45 |
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, w/0.6%+ of carbon, nesoi |
25% |
2024 |
|
7213.91.60 |
Iron/nonalloy steel, nesoi, hot-rolled bars & rods in irregularly wound coils, w/cir. x-sect. diam. <14mm, w/less th/0.6% carbon, nesoi |
25% |
2024 |
|
7213.99.00 |
Iron/nonalloy steel, nesoi, hot-rolled bars & rods, w/cir. x-sect. diam 14+mm or non-circ. x- sect., in irregularly wound coils, nesoi |
25% |
2024 |
|
7214.20.00 |
Iron/nonalloy steel, concrete reinforcing bars and rods, not further worked than hot-rolled, hot-drawn or hot-extruded, n/coils |
25% |
2024 |
|
7214.30.00 |
Free-cutting steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot- extruded, n/coils, nesoi |
25% |
2024 |
|
7214.91.00 |
Iron/nonalloy steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot- extruded, w/rectangular (o/than square) X- section |
25% |
2024 |
|
7214.99.00 |
Iron/nonalloy steel, bars and rods, not further worked than hot-rolled, hot-drawn or hot- extruded, w/non-rectangular X-sect, not in coils |
25% |
2024 |
|
7215.10.00 |
Free-cutting steel, bars and rods, not further worked than cold-formed or cold-finished, not in coils |
25% |
2024 |
|
7215.50.00 |
Iron/nonalloy steel nesoi, bars and rods, not further wkd. than cold-formed or cold-finished, not in coils |
25% |
2024 |
|
7215.90.10 |
Iron/nonalloy steel, bars and rods, not cold- formed, plated or coated with metal |
25% |
2024 |
|
7215.90.30 |
Iron/nonalloy steel, bars and rods, cold-formed, plated or coated with metal |
25% |
2024 |
|
7215.90.50 |
Iron/nonalloy steel, bars and rods, further worked than cold-formed or cold-finished, nesoi |
25% |
2024 |
|
7216.10.00 |
Iron/nonalloy steel, U,I or H-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height under 80 mm |
25% |
2024 |
|
7216.21.00 |
Iron/nonalloy steel, L-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height under 80 mm |
25% |
2024 |
|
7216.22.00 |
Iron/nonalloy steel, T-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height under 80 mm |
25% |
2024 |
|
7216.31.00 |
Iron/nonalloy steel, U-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height of 80 mm or more |
25% |
2024 |
|
7216.32.00 |
Iron/nonalloy steel, I-sections (standard beams), not further worked than hot-rolled, hot- drawn or extruded, w/height 80 mm or more |
25% |
2024 |
|
7216.33.00 |
Iron/nonalloy steel, H-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height 80 mm or more |
25% |
2024 |
|
7216.40.00 |
Iron/nonalloy steel, L or T-sections, not further worked than hot-rolled, hot-drawn or extruded, w/height 80 mm or more |
25% |
2024 |
|
7216.50.00 |
Iron/nonalloy steel, angles, shapes & sections nesoi, not further worked than hot-rolled, hot- drawn or extruded |
25% |
2024 |
|
7216.99.00 |
Iron/nonalloy steel, angles, shapes & sections nesoi, further wkd. than cold-formed or cold- finished and not from flat-rolled products |
25% |
2024 |
|
7217.10.10 |
Iron/nonalloy steel, flat wire, <0.25% carbon, not plated or coated, w/thick n/o 0.25 mm |
25% |
2024 |
|
7217.10.20 |
Iron/nonalloy steel, flat wire, <0.25% carbon, not plated or coated, w/thick o/0.25mm but n/o 1.25 mm |
25% |
2024 |
|
7217.10.30 |
Iron/nonalloy steel, flat wire, <0.25% carbon, not plated or coated, w/thick o/1.25 mm |
25% |
2024 |
|
7217.10.50 |
Iron/nonalloy steel, round wire, <0.25% carbon, not plated or coated, w/diameter of 1.5 mm or more |
25% |
2024 |
|
7217.10.60 |
Iron/nonalloy steel, wire (other than flat or round), <0.25% carbon, not plated or coated |
25% |
2024 |
|
7217.10.70 |
Iron/nonalloy steel, flat wire, w/0.25% or more carbon, not plated or coated |
25% |
2024 |
|
7217.10.80 |
Iron/nonalloy steel, round wire, w/0.25% or more carbon, not plated or coated |
25% |
2024 |
|
7217.10.90 |
Iron/nonalloy steel, wire (other than flat or round), w/0.25% or more of carbon, not plat or coated |
25% |
2024 |
|
7217.20.15 |
Iron/nonalloy steel, flat wire, plated or coated with zinc |
25% |
2024 |
|
7217.20.30 |
Iron/nonalloy steel, round wire, <0.25% carbon, plated or coated with zinc, w/diameter of 1.5 mm or more |
25% |
2024 |
|
7217.20.45 |
Iron/nonalloy steel, round wire, w/0.25% or more carbon and/or <1.5mm diam, plated or coated with zinc |
25% |
2024 |
|
7217.20.60 |
Iron/nonalloy steel, wire (other than flat or round), <0.25% carbon, plated or coated with zinc |
25% |
2024 |
|
7217.20.75 |
Iron/nonalloy steel, wire (other than flat or round), w/0.25% or more of carbon, plated or coated with zinc |
25% |
2024 |
|
7217.30.15 |
Iron/nonalloy steel, flat wire, plated or coated with base metal other than zinc |
25% |
2024 |
|
7217.30.30 |
Iron/nonalloy steel, round wire, <0.25% carbon, plated or coated with base metal other than zinc, w/diam. of 1.5 mm or more |
25% |
2024 |
|
7217.30.60 |
Iron/nonalloy steel, wire (other than flat or round), <0.25% carbon, plated or coated with base metal other than zinc |
25% |
2024 |
|
7217.30.75 |
Iron/nonalloy steel, wire (other than flat or round), w/0.25% or more of carbon, plated or coated with base metal other than zinc |
25% |
2024 |
|
7217.90.10 |
Iron/nonalloy steel, wire, coated with plastics |
25% |
2024 |
|
7217.90.50 |
Iron/nonalloy steel, wire, plated or coated with materials other than base metals or plastics |
25% |
2024 |
|
7218.10.00 |
Stainless steel, ingots and other primary forms |
25% |
2024 |
|
7218.91.00 |
Stainless steel, semifinished products of rectangular (other than square) cross-section |
25% |
2024 |
|
7218.99.00 |
Stainless steel, semifinished products, other than of rectangular (other than square) cross- section |
25% |
2024 |
|
7219.11.00 |
Stainless steel, width 600mm+, hot-rolled flat- rolled products, in coils, w/thickness o/10 mm |
25% |
2024 |
|
7219.12.00 |
Stainless steel, width 600mm+, hot-rolled flat- rolled products, in coils, w/thick. 4.75 mm or more but n/o 10 mm |
25% |
2024 |
|
7219.13.00 |
Stainless steel, width 600mm+, hot-rolled flat- rolled products, in coils, w/thick. 3 mm or more but less than 4.75 mm |
25% |
2024 |
|
7219.14.00 |
Stainless steel, width 600mm+, hot-rolled flat- rolled products, in coils, w/thickness less than 3 mm |
25% |
2024 |
|
7219.21.00 |
Stainless steel, width 600mm+, hot-rolled flat- rolled products, not in coils, w/thickness o/10 mm |
25% |
2024 |
|
7219.22.00 |
Stainless steel, width 600mm+, hot-rolled flat- rolled products, not in coils, w/thick. 4.75 mm or more but n/o 10 mm |
25% |
2024 |
|
7219.23.00 |
Stainless steel, width 600mm+, hot-rolled flat- rolled products, not in coils, w/thick. 3 mm or more but less than 4.75 mm |
25% |
2024 |
|
7219.24.00 |
Stainless steel, width 600mm+, hot-rolled flat- rolled products, not in coils, w/thickness less than 3 mm |
25% |
2024 |
|
7219.31.00 |
Stainless steel, width 600mm+, cold-rolled flat- rolled products, w/thickness of 4.75 mm or more |
25% |
2024 |
|
7219.32.00 |
Stainless steel, width 600mm+, cold-rolled flat- rolled products, w/thickness of 3 mm or more but less than 4.75 mm |
25% |
2024 |
|
7219.33.00 |
Stainless steel, width 600mm+, cold-rolled flat- rolled products, w/thickness o/1 mm but less than 3 mm |
25% |
2024 |
|
7219.34.00 |
Stainless steel, width 600mm+, cold-rolled flat- rolled products, w/thickness of 0.5 mm or more but n/o 1 mm |
25% |
2024 |
|
7219.35.00 |
Stainless steel, width 600mm+, cold-rolled flat- rolled products, w/thickness of less than 0.5 mm |
25% |
2024 |
|
7219.90.00 |
Stainless steel, width 600mm+, flat-rolled products, nesoi, further worked than cold-rolled |
25% |
2024 |
|
7220.12.10 |
Stainless steel, width 300m+ but less th/600mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm |
25% |
2024 |
|
7220.12.50 |
Stainless steel, width less th/300mm, hot-rolled flat-rolled products, w/thickness of less than 4.75 mm |
25% |
2024 |
|
7220.20.10 |
Stainless steel, width 300+ but less th/600mm, cold-rolled flat-rolled products |
25% |
2024 |
|
7220.20.60 |
Stainless steel, width less th/300mm, cold- rolled flat-rolled products, w/thickness o/1.25 mm |
25% |
2024 |
|
7220.20.70 |
Stainless steel, width less th/300mm, cold- rolled flat-rolled products, w/ thickness of 0.25 mm but n/o 1.25 mm |
25% |
2024 |
|
7220.20.80 |
Stainless razor blade steel, width less th/300mm, cold-rolled flat-rolled, w/thickness n/o 0.25 mm |
25% |
2024 |
|
7220.90.00 |
Stainless steel, width less th/600mm, flat-rolled products further worked than cold-rolled |
25% |
2024 |
|
7221.00.00 |
Stainless steel, bars and rods in irregularly wound coils, hot-rolled |
25% |
2024 |
|
7222.11.00 |
Stainless steel, bars and rods, hot-rolled, hot- drawn or extruded, of circular cross-section |
25% |
2024 |
|
7222.19.00 |
Stainless steel, bars and rods, hot-rolled, hot- drawn or extruded, other than of circular cross- section |
25% |
2024 |
|
7222.20.00 |
Stainless steel, bars and rods, not further worked than cold-formed or cold-finished, nesoi |
25% |
2024 |
|
7222.30.00 |
Stainless steel, bars and rods, further worked than cold-formed or cold-finished, nesoi |
25% |
2024 |
|
7222.40.30 |
Stainless steel, angles, shapes & sections, hot- rolled, not drilled/punched or otherwise advanced |
25% |
2024 |
|
7222.40.60 |
Stainless steel, angles, shapes & sections, other than hot-rolled and not drilled/punched or otherwise advanced |
25% |
2024 |
|
7223.00.10 |
Stainless steel, round wire |
25% |
2024 |
|
7223.00.50 |
Stainless steel, flat wire |
25% |
2024 |
|
7223.00.90 |
Stainless steel, wire (other than round or flat wire) |
25% |
2024 |
|
7224.10.00 |
Alloy (o/than stainless) steel, ingots and other primary forms |
25% |
2024 |
|
7224.90.00 |
Alloy (o/than stainless) steel, semifinished products |
25% |
2024 |
|
7225.11.00 |
Alloy silicon electrical steel (grain-oriented), width 600mm+, flat-rolled products |
25% |
2024 |
|
7225.19.00 |
Alloy silicon electrical steel (other than grain- oriented), width 600mm+, flat-rolled products |
25% |
2024 |
|
7225.30.11 |
Alloy tool steel, width 600mm+, hot-rolled flat- rolled products, in coils, w/thick. of 4.75 mm or more |
25% |
2024 |
|
7225.30.30 |
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat- rolled products, in coils, w/thick 4.75mm+ |
25% |
2024 |
|
7225.30.51 |
Alloy tool steel, width 600mm+, hot-rolled flat- rolled products, in coils, w/thick. of less than 4.75 mm |
25% |
2024 |
|
7225.30.70 |
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat- rolled prod., in coils, w/thick less 4.75mm |
25% |
2024 |
|
7225.40.11 |
Alloy tool steel, width 600mm+, hot-rolled flat- rolled products, n/coils, w/thick. of 4.75 mm or more |
25% |
2024 |
|
7225.40.30 |
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat- rolled products, n/coils, w/thick 4.75mm+ |
25% |
2024 |
|
7225.40.51 |
Alloy tool steel, width 600mm+, hot-rolled flat- rolled products, n/coils, w/thick. of less than 4.75 mm |
25% |
2024 |
|
7225.40.70 |
Alloy (o/th stainless, silicon elect., hi-speed, or tool) steel, width 600mm+, hot-rolled flat- rolled prod., n/coils, w/thick less 4.75mm |
25% |
2024 |
|
7225.50.11 |
Alloy tool steel, width 600mm+, cold-rolled flat-rolled products |
25% |
2024 |
|
7225.50.60 |
Alloy steel (o/ than tool), width 600mm+, cold- rolled flat-rolled products, w/thickness 4.75 mm or more |
25% |
2024 |
|
7225.50.70 |
Alloy heat-resisting steel, width 600mm+, cold- rolled flat-rolled products, w/thickness less than 4.75 mm |
25% |
2024 |
|
7225.50.80 |
Alloy steel (o/th heat-resisting), width 600mm+, cold-rolled flat-rolled products, w/thickness less than 4.75 mm |
25% |
2024 |
|
7225.91.00 |
Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, electrolytically plated or coated with zinc |
25% |
2024 |
|
7225.92.00 |
Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, plated or coated with zinc (o/than electrolytically) |
25% |
2024 |
|
7225.99.00 |
Alloy steel, width 600mm+, flat-rolled products further worked than cold-rolled, nesoi |
25% |
2024 |
|
7226.11.10 |
Alloy silicon electrical steel (grain-oriented), width 300mm+ but less th/600mm, flat-rolled products |
25% |
2024 |
|
7226.11.90 |
Alloy silicon electrical steel (grain-oriented), width less th/300mm, flat-rolled products |
25% |
2024 |
|
7226.19.10 |
Alloy silicon electrical steel (o/than grain- oriented), width 300mm+ but less th/600mm, flat-rolled products |
25% |
2024 |
|
7226.19.90 |
Alloy silicon electrical steel (o/than grain- oriented), width less th/300mm, flat-rolled products |
25% |
2024 |
|
7226.20.00 |
Alloy high-speed steel, width less th/600mm, flat-rolled products of high-speed steel |
25% |
2024 |
|
7226.91.05 |
Alloy chipper knife tool steel (o/than hi-speed), width less th/600mm, hot-rolled flat-rolled products |
25% |
2024 |
|
7226.91.15 |
Alloy tool steel (o/than hi-speed/chipper knife), width 300mm+ but less th/600mm, hot-rolled flat-rolled products |
25% |
2024 |
|
7226.91.25 |
Alloy tool steel (o/than hi-speed/chipper knife), width less th/300mm, hot-rolled flat-rolled products |
25% |
2024 |
|
7226.91.50 |
Alloy steel (o/than silicon elect./tool), width less th/600mm, hot-rolled flat-rolled products, w/thickness of 4.75 mm or more |
25% |
2024 |
|
7226.91.70 |
Alloy steel (o/than silicon elect./tool), width 300mm+ but less th/600mm, hot-rolled flat- rolled products, w/thickness less than 4.75 mm |
25% |
2024 |
|
7226.91.80 |
Alloy steel (o/than silicon elect./tool), width less th/300mm, hot-rolled flat-rolled products, w/thickness less than 4.75 mm |
25% |
2024 |
|
7226.92.10 |
Alloy tool steel (o/than hi-speed), width 300mm+ but less th/600mm, cold-rolled flat- rolled products |
25% |
2024 |
|
7226.92.30 |
Alloy tool steel (o/than hi-speed), width less th/300mm, cold-rolled flat-rolled products |
25% |
2024 |
|
7226.92.50 |
Alloy steel (o/than tool), width 300mm+ but less th/600mm, cold-rolled flat-rolled products |
25% |
2024 |
|
7226.92.70 |
Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness n/o 0.25 mm |
25% |
2024 |
|
7226.92.80 |
Alloy steel (o/than tool), width less th/300mm, cold-rolled flat-rolled products, w/thickness o/0.25 mm |
25% |
2024 |
|
7226.99.01 |
Alloy steel, width less than 600mm, flat-rolled products further worked than cold-rolled, nesoi |
25% |
2024 |
|
7227.10.00 |
Alloy high-speed steel, bars and rods in irregularly wound coils, hmot-rolled |
25% |
2024 |
|
7227.20.00 |
Alloy silico-manganese steel, bars and rods in irregularly wound coils, hot-rolled |
25% |
2024 |
|
7227.90.10 |
Alloy tool steel (o/than hi-speed), bars & rods in irregular wound coils, hot-rolled, n/tempered, treated or partly manufactured |
25% |
2024 |
|
7227.90.20 |
Alloy tool steel (o/than hi-speed), bars and rods in irregularly wound coils, hot-rolled, nesoi |
25% |
2024 |
|
7227.90.60 |
Alloy steel (o/than hi-speed/silico-mang./tool) steel, bars and rods in irregularly wound coils, hot-rolled |
25% |
2024 |
|
7228.20.10 |
Alloy silico-manganese steel, bars and rods, not cold-formed, o/than hot-rolled and in irregularly wound coils |
25% |
2024 |
|
7228.20.50 |
Alloy silico-manganese steel, bars and rods, cold formed, o/than hot-rolled and in irregularly wound coils |
25% |
2024 |
|
7228.30.40 |
Alloy chipper knife tool steel, bars and rods, not cold-formed & not further worked than hot- rolled, hot-drawn or extruded |
25% |
2024 |
|
7228.30.60 |
Alloy tool steel (o/than ball-bearing/chipper knife), bars and rods, not further worked than hot-rolled, hot-drawn or extruded |
25% |
2024 |
|
7228.30.80 |
Alloy steel (o/than hi-speed, silico-mang./tool), bars and rods, not further worked than hot- rolled, hot-drawn or extruded |
25% |
2024 |
|
7228.40.00 |
Alloy steel, bars and rods, not further worked than forged |
25% |
2024 |
|
7228.50.10 |
Alloy tool steel (o/than hi-speed), bars and rods, not further worked than cold-formed or cold-finished |
25% |
2024 |
|
7228.50.50 |
Alloy steel (o/than tool), bars and rods, not further worked than cold-formed or cold- finished |
25% |
2024 |
|
7228.60.10 |
Alloy tool steel (o/than hi-speed), bars and rods, further worked than hot-rolled, forged, cold-formed or cold-finished |
25% |
2024 |
|
7228.60.60 |
Alloy steel (o/than tool), bars and rods, further worked than hot-rolled, forged but not cold- formed |
25% |
2024 |
|
7228.60.80 |
Alloy steel (o/than tool), bars and rods, cold- formed |
25% |
2024 |
|
7228.70.30 |
Alloy steel, angles, shapes and sections, hot- rolled & not drilled/not punched and not otherwise advanced |
25% |
2024 |
|
7228.70.60 |
Alloy steel, angles, shapes and sections, o/than hot-rolled & not drilled/punced and not otherwise advanced |
25% |
2024 |
|
7229.20.00 |
Alloy silico-manganese steel, wire |
25% |
2024 |
|
7229.90.10 |
Alloy steel (o/than hi-speed/silico-mang.), flat wire |
25% |
2024 |
|
7229.90.50 |
Alloy steel (o/than hi-speed/silico-mang.), round wire |
25% |
2024 |
|
7229.90.90 |
Alloy steel (o/than hi-speed/silico-mang.), wire (o/than flat or round wire) |
25% |
2024 |
|
7301.10.00 |
Iron or steel sheet piling, whether or not drilled, punched or made from assembled elements |
25% |
2024 |
|
7302.10.10 |
Iron or nonalloy steel, rails for railway or tramway tracks |
25% |
2024 |
|
7302.10.50 |
Alloy steel, rails for railway or tramway tracks |
25% |
2024 |
|
7302.40.00 |
Iron or steel, fish plates and sole plates for jointing or fixing rails |
25% |
2024 |
|
7302.90.10 |
Sleepers (cross-ties) for railway or tramway track construction of iron or steel |
25% |
2024 |
|
7302.90.90 |
Railway or tramway track construction material and other materials specialized for joing or fixing rails, of iron or steel, nesoi |
25% |
2024 |
|
7304.11.00 |
Stainless steel, seamless line pipe used for oil or gas pipelines |
25% |
2024 |
|
7304.19.10 |
Iron (o/than cast) or nonalloy steel, seamless line pipe used for oil and gas pipelines |
25% |
2024 |
|
7304.19.50 |
Alloy (other than stainless) steel, seamless line pipe used for oil or gas pipelines |
25% |
2024 |
|
7304.22.00 |
Stainless steel, seamless drill pipe, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.23.30 |
Iron (o/than cast) or nonalloy steel, seamless drill pipe, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.23.60 |
Alloy (other than stainless) steel, seamless drill pipe, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.24.30 |
Stainless steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.24.40 |
Stainless steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.24.60 |
Stainless steel, seamless tubing, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.29.10 |
Iron (o/than cast) or nonalloy steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.29.20 |
Iron (o/than cast) or nonalloy steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.29.31 |
Alloy (other than stainless) steel, seamless casing pipe, threaded or coupled, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.29.41 |
Alloy (other than stainless) steel, seamless casing pipe, not threaded or coupled, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.29.50 |
Iron (o/than cast) or nonalloy, seamless tubing, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.29.61 |
Alloy (other than stainless) steel, seamless tubing, of a kind used in drilling for oil or gas |
25% |
2024 |
|
7304.31.30 |
Iron (o/than cast) or nonalloy steel, seamless, cold-drawn or cold-rolled, hollow bars w/circular cross section |
25% |
2024 |
|
7304.31.60 |
Iron (o/than cast) or nonalloy steel, seamless, cold-drawn or cold-rolled, tubes, pipes & hollow profiles, w/circular cross section, nesoi |
25% |
2024 |
|
7304.39.00 |
Iron (o/than cast) or nonalloy steel, seamless, not cold-drawn or cold-rolled, tubes, pipes and hollow prof., w/circular cross sect., nesoi |
25% |
2024 |
|
7304.49.00 |
Stainless steel, seamless, not cold-drawn/cold- rolled, tubes, pipes and hollow profiles, w/circular cross section |
25% |
2024 |
|
7304.51.10 |
Alloy steel (o/than stainless), seamless, cold- drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., for mfr of ball/roller bearings |
25% |
2024 |
|
7304.51.50 |
Alloy steel (o/than stainless), seamless, cold- drawn/cold-rolled, tubes, pipes and hollow profiles, w/circular cross section, nesoi |
25% |
2024 |
|
7304.59.10 |
Alloy steel (o/than stainless), seamless, n/cold- drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for mfr ball/roller bearings |
25% |
2024 |
|
7304.59.20 |
Alloy steel (o/than stainless), seamless, n/cold- drawn/cold-rolled, tubes, pipes, etc. w/circ. cross sect., for boilers, heaters, etc |
25% |
2024 |
|
7304.59.60 |
Heat-resisting alloy steel (o/than stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes, etc., w/circ. cross sect., nesoi |
25% |
2024 |
|
7304.59.80 |
Alloy steel (o/than heat-resist or stainless), seamless, n/cold-drawn/cold-rolled, tubes, pipes and hollow prof., w/circ. cross sect., nesoi |
25% |
2024 |
|
7304.90.10 |
Iron (o/than cast) or nonalloy steel, seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness of 4 mm or more |
25% |
2024 |
|
7304.90.70 |
Alloy steel (o/than stainless), seamless, tubes, pipes and hollow profiles, o/than circ. cross sect., w/wall thickness less than 4 mm |
25% |
2024 |
|
7305.11.10 |
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. submerg. arc weld., used for oil/gas |
25% |
2024 |
|
7305.11.50 |
Alloy steel, seamed, circ. w/cross sect. & ext. diam o/406.4mm, line pipe, long. submerg. arc weld., used for oil/gas pipelines |
25% |
2024 |
|
7305.12.10 |
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. welded nesoi, used for oil/gas |
25% |
2024 |
|
7305.12.50 |
Alloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, long. welded nesoi, used for oil/gas pipelines |
25% |
2024 |
|
7305.19.10 |
Iron or nonalloy steel, seamed, w/circ. cross sect.& ext. diam o/406.4mm, line pipe, not long. welded, used for oil/gas |
25% |
2024 |
|
7305.19.50 |
Alloy steel, seamed, w/circ. cross sect. & ext. diam o/406.4mm, line pipe, not long. welded, used for oil/gas pipelines |
25% |
2024 |
|
7305.20.20 |
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, threaded/coupled, of kind for drilling for oil/gas |
25% |
2024 |
|
7305.20.40 |
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, n/threaded/coupled, of kind for drill. for oil/gas |
25% |
2024 |
|
7305.20.60 |
Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, threaded/coupled, of kind for drilling for oil/gas |
25% |
2024 |
|
7305.20.80 |
Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, casing pipe, n/threaded/coupled, of kind for drilling for oil/gas |
25% |
2024 |
|
7305.31.20 |
Steel, long. welded, w/circ. cross sect & ext. diam o/406.4mm, tapered pipes and tubes principally used as pts of illuminating arts. |
25% |
2024 |
|
7305.31.40 |
Iron or nonalloy steel, long. welded, w/circ. cross sect. & ext. diam. o/406.4mm, tubes and pipes, o/th used in oil/gas drill.etc |
25% |
2024 |
|
7305.31.60 |
Alloy steel, long. welded, w/circ. cross sect. & ext. diam. o/406.4mm, tubes and pipes, o/than used in oil/gas drill. or pipelines |
25% |
2024 |
|
7305.39.10 |
Iron or nonalloy steel, weld. o/than long. weld., w/circ. x-sect. & ext. diam. o/406.4mm, tubes and pipes, o/th used in oil/gas drill.etc |
25% |
2024 |
|
7305.39.50 |
Alloy steel, weld. o/than long. weld., w/circ. x- sect. & ext. diam. o/406.4mm, tubes and pipes, o/than used in oil/gas drill. or pipelines |
25% |
2024 |
|
7305.90.10 |
Iron or nonalloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, not welded, tubes and pipes, o/th used in oil/gas drill.etc |
25% |
2024 |
|
7305.90.50 |
Alloy steel, seamed, w/circ. cross sect. & ext. diam. o/406.4mm, not welded, tubes and pipes, o/than used in oil/gas drill. or pipelines |
25% |
2024 |
|
7306.11.00 |
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil and gas pipelines |
25% |
2024 |
|
7306.19.10 |
Iron or nonalloy steel, seamed, w/ext. diam. 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil and gas pipelines |
25% |
2024 |
|
7306.19.51 |
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, line pipe of a kind used for oil an |
25% |
2024 |
|
7306.21.30 |
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind used in drilling for oil/gas |
25% |
2024 |
|
7306.21.40 |
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing of kind used in drilling for oil/gas |
25% |
2024 |
|
7306.21.80 |
Welded stainless steel, w/ext. diam 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling for oil/gas |
25% |
2024 |
|
7306.29.10 |
Iron or nonalloy steel, seamed, w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind used in drill. oil/gas |
25% |
2024 |
|
7306.29.20 |
Iron or nonalloy steel, seamed, w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing kind used drill for oil/gas |
25% |
2024 |
|
7306.29.31 |
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, threaded/coupled, casing of kind us |
25% |
2024 |
|
7306.29.41 |
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, n/threaded/coupled, casing of kind |
25% |
2024 |
|
7306.29.60 |
Iron or nonalloy steel, seamed, w/ext. diam. 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling for oil/gas |
25% |
2024 |
|
7306.29.81 |
Alloy steel, seamed (o/than welded stainless steel), w/ext. diam 406.4mm or less or o/than circ. x-sect, tubing of a kind used for drilling |
25% |
2024 |
|
7306.30.10 |
Iron or nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. less than 1.65 mm |
25% |
2024 |
|
7306.30.30 |
Nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tapered pipes & tubes, w/wall thick. of 1.65 mm+, pts. of illum. arts. |
25% |
2024 |
|
7306.30.50 |
Iron or nonalloy steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, pipes, tubes & holl. prof., w/wall thick. of 1.65 mm or more |
25% |
2024 |
|
7306.40.10 |
Stainless steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. less than 1.65 mm |
25% |
2024 |
|
7306.40.50 |
Stainless steel, welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow profiles, w/wall thick. of 1.65 mm or more |
25% |
2024 |
|
7306.50.10 |
Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. less th/1.65 mm |
25% |
2024 |
|
7306.50.30 |
Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tapered pipes & tubes, w/wall thick. of 1.65 mm+, pts. illum |
25% |
2024 |
|
7306.50.50 |
Alloy steel (o/stainless), welded, w/circ. x-sect & ext. diam. 406.4mm or less, tubes, pipes, hollow prof., w/wall thick. of 1.65 mm+ |
25% |
2024 |
|
7306.61.10 |
Iron or nonalloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more |
25% |
2024 |
|
7306.61.30 |
Alloy steel, welded, w/square or rectangular x- sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more |
25% |
2024 |
|
7306.61.50 |
Iron or nonalloy steel, welded, w/square or rectangular x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm |
25% |
2024 |
|
7306.61.70 |
Alloy steel, welded, w/square or rectangular x- sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm |
25% |
2024 |
|
7306.69.10 |
Iron or nonalloy steel, welded, w/other non- circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more |
25% |
2024 |
|
7306.69.30 |
Alloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness of 4 mm or more |
25% |
2024 |
|
7306.69.70 |
Alloy steel, welded, w/other non-circ. x-sect, tubes, pipes and hollow profiles, w/wall thickness less than 4 mm |
25% |
2024 |
|
7306.90.10 |
Iron or nonalloy steel, seamed o/welded, w/non-circ. x-sect. or circ. x-sect. w/ext. diam. 406.4mm or less, tubes, pipes & hollow profiles |
25% |
2024 |
|
7306.90.50 |
Alloy steel, seamed o/than welded, w/non-circ. x-sect or circ. x-sect w/ext. diam. 406.4mm or less, tubes, pipes and hollow profiles |
25% |
2024 |
|
7601.10.30 |
Aluminum (o/than alloy), unwrought, in coils, w/uniform x-section throughout length & w/least cross-sectional dimension n/o 9.5 mm |
25% |
2024 |
|
7601.10.60 |
Aluminum (o/than alloy), unwrought nesoi |
25% |
2024 |
|
7601.20.30 |
Aluminum alloys, unwrought, in coils, w/uniform x-section throughout length & w/least cross-sectional dimension n/o 9.5 mm |
25% |
2024 |
|
7601.20.60 |
Aluminum alloys, w/25% or more by weight of silicon, unwrought nesoi |
25% |
2024 |
|
7601.20.90 |
Aluminum alloys nesoi, unwrought nesoi |
25% |
2024 |
|
7604.10.10 |
Aluminum (o/than alloy), profiles |
25% |
2024 |
|
7604.10.30 |
Aluminum (o/than alloy), bar and rods, with a round cross section |
25% |
2024 |
|
7604.10.50 |
Aluminum (o/than alloy), bar and rods, other than with a round cross section |
25% |
2024 |
|
7604.21.00 |
Aluminum alloy, hollow profiles |
25% |
2024 |
|
7604.29.10 |
Aluminum alloy, profiles (o/than hollow profiles) |
25% |
2024 |
|
7604.29.30 |
Aluminum alloy, bars and rods, having a round cross section |
25% |
2024 |
|
7604.29.50 |
Aluminum alloy, bars and rods, other than with a round cross section |
25% |
2024 |
|
7605.11.00 |
Aluminum (o/than alloy), wire, with a maximum cross-sectional dimension over 7 mm |
25% |
2024 |
|
7605.19.00 |
Aluminum (o/than alloy), wire, with a maximum cross-sectional dimension of 7 mm or less |
25% |
2024 |
|
7605.21.00 |
Aluminum alloy, wire, with a maximum cross- sectional dimension over 7 mm |
25% |
2024 |
|
7605.29.00 |
Aluminum alloy, wire, with a maximum cross- sectional dimension of 7 mm or less |
25% |
2024 |
|
7606.11.30 |
Aluminum (o/than alloy), plates/sheets/strip, w/thick. o/0.2mm, rectangular (incl. sq), not clad |
25% |
2024 |
|
7606.11.60 |
Aluminum (o/than alloy), plates/sheets/strip, w/thick. o/0.2mm, rectangular (incl. sq), clad |
25% |
2024 |
|
7606.12.30 |
Aluminum alloy, plates/sheets/strip, w/thick. o/0.2mm, rectangular (incl. sq), not clad |
25% |
2024 |
|
7606.12.60 |
Aluminum alloy, plates/sheets/strip, w/thick. o/0.2mm, rectangular (incl. sq), clad |
25% |
2024 |
|
7606.91.30 |
Aluminum (o/than alloy), plates/sheets/strip, w/thick. o/0.2mm, o/than rectangular (incl. sq), not clad |
25% |
2024 |
|
7606.91.60 |
Aluminum (o/than alloy), plates/sheets/strip, w/thick. o/0.2mm, o/than rectangular (incl. sq), clad |
25% |
2024 |
|
7606.92.30 |
Aluminum alloy, plates/sheets/strip, w/thick. o/0.2mm, o/than rectangular (incl. sq), not clad |
25% |
2024 |
|
7606.92.60 |
Aluminum alloy, plates/sheets/strip, w/thick. o/0.2mm, o/than rectangular (incl. sq), clad |
25% |
2024 |
|
7607.11.30 |
Aluminum, foil, w/thickness n/o 0.01 mm, rolled but not further worked, not backed |
25% |
2024 |
|
7607.11.60 |
Aluminum, foil, w/thickness over 0.01 mm but n/o 0.15 mm, rolled but not further worked, not backed |
25% |
2024 |
|
7607.11.90 |
Aluminum, foil, w/thickness over 0.15 mm but n/o 0.2 mm, rolled but not further worked, not backed |
25% |
2024 |
|
7607.19.60 |
Aluminum, foil nesoi, w/thickness o/0.15mm but n/o 0.2 mm or 0.15mm or less & not cut to shape, not rolled, not backed, nesoi |
25% |
2024 |
|
7607.20.10 |
Aluminum, foil, w/thickness n/o 0.2 mm, backed, covered or decorated with a character, design, fancy effect or pattern |
25% |
2024 |
|
7608.10.00 |
Aluminum (o/than alloy), tubes and pipes |
25% |
2024 |
|
7608.20.00 |
Aluminum alloy, tubes and pipes |
25% |
2024 |
|
7609.00.00 |
Aluminum, fittings for tubes and pipes |
25% |
2024 |
|
Syringes and Needles |
|||
|
HTSUS |
Product Description |
Rate |
Timing |
|
9018.31.00 |
Syringes, with or without their needles; parts and accessories thereof |
50% |
2024 |
|
9018.32.00 |
Tubular metal needles and needles for sutures, used in medical, surgical, dental or veterinary sciences, and parts and accessories thereof |
50% |
2024 |
附件B：拟议的机械排除程序适用的产品线
请向上滑动阅览
|
Annex B |
|
|
HTSUS |
Product Description |
|
8417.10.00 |
Furnaces and ovens for the roasting, melting or other heat treatment of ores, pyrites or of metals |
|
8417.80.00 |
Industrial or laboratory furnaces and ovens nesoi (not elsewhere specified or included), including incinerators, nonelectric |
|
8418.69.01 |
Refrigerating or freezing equipment nesoi |
|
8419.33.10 |
Lyophilization apparatus; freeze drying units; spray dryers, for agricultural products |
|
8419.33.50 |
Lyophilization apparatus; freeze drying units; spray dryers, other than for agricultural products, nesoi |
|
8419.34.00 |
Other dryers for agricultural products (other than lyophilization apparatus; freeze drying units; spray dryers) |
|
8419.35.10 |
Dryers for wood |
|
8419.35.50 |
Dryers for paper pulp, paper or paperboard |
|
8419.39.02 |
Other dryers other than of a kind used for domestic purposes, nesoi (other than lyophilization apparatus; freeze drying units; spray dryers) |
|
8419.40.00 |
Distilling or rectifying plant, not used for domestic purposes |
|
8419.50.10 |
Brazed aluminum plate-fin heat exchangers |
|
8419.50.50 |
Heat exchange units, nesoi |
|
8419.60.10 |
Machinery for liquefying air or gas containing brazed aluminum plate-fin heat exchangers |
|
8419.60.50 |
Machinery for liquefying air or gas, nesoi |
|
8419.89.10 |
Machinery and equipment for the treatment of materials (by a process which changes temperatures), for making |
|
paper pulp, paper or paperboard |
|
|
8419.89.60 |
Industrial machinery, plant or equip. for the treat. of mat., involving a change in temp., for molten-salt-cooled acrylic |
|
acid reactors |
|
|
8419.89.95 |
Industrial machinery, plant or equipment for the treatment of materials, by process involving a change in temperature, nesoi |
|
8420.10.10 |
Textile calendering or rolling machines |
|
8420.10.20 |
Calendering or similar rolling machines for making paper pulp, paper or paperboard |
|
8420.10.90 |
Calendering or other rolling machines, other than for metals or glass, nesoi |
|
8420.91.10 |
Cylinders for textile calendering or rolling machines |
|
8420.91.20 |
Cylinders for paper pulp, paper or paperboard calendering or rolling machines |
|
8420.91.90 |
Cylinders for calendering and similar rolling machines, nesoi |
|
8422.19.00 |
Dishwashing machines other than of the household type |
|
8422.20.00 |
Machinery for cleaning or drying bottles or other containers |
|
8422.30.11 |
Can-sealing machines |
|
8422.30.91 |
Machinery for filling, closing, sealing, capsuling or labeling bottles, cans, boxes or other containers; machinery for aerating beverages; nesoi |
|
8422.40.11 |
Machinery for packing or wrapping pipe tobacco, candy and cigarette packages; combination candy cutting and wrapping machines |
|
8422.40.91 |
Packing or wrapping machinery, nesoi |
|
8429.11.00 |
Self-propelled bulldozers and angledozers, for track laying |
|
8429.19.00 |
Self-propelled bulldozers and angledozers other than track laying |
|
8429.20.00 |
Self-propelled graders and levelers |
|
8429.30.00 |
Self-propelled scrapers |
|
8429.40.00 |
Self-propelled tamping machines and road rollers |
|
8429.51.10 |
Self-propelled front-end shovel loaders, wheel-type |
|
8429.51.50 |
Self-propelled front-end shovel loaders, other than wheel-type |
|
8429.52.10 |
Self-propelled backhoes, shovels, clamshells and draglines with a 360 degree revolving superstructure |
|
8429.52.50 |
Self-propelled machinery with a 360 degree revolving superstructure, other than backhoes, shovels, clamshells and draglines |
|
8429.59.10 |
Self-propelled backhoes, shovels, clamshells and draglines not with a 360 degree revolving superstructure |
|
8429.59.50 |
Self-propelled machinery not with a 360 degree revolving superstructure, other than backhoes, shovels, clamshells and draglines |
|
8430.10.00 |
Pile-drivers and pile-extractors |
|
8430.31.00 |
Self-propelled coal or rock cutters and tunneling machinery |
|
8430.39.00 |
Coal or rock cutters and tunneling machinery, not self-propelled |
|
8430.41.00 |
Self-propelled boring or sinking machinery |
|
8430.49.40 |
Offshore oil and natural gas drilling and production platforms |
|
8430.49.80 |
Boring or sinking machinery, not self-propelled, nesoi |
|
8430.50.10 |
Self-propelled peat excavators |
|
8430.50.50 |
Self-propelled machinery for working earth, minerals or ores, nesoi |
|
8430.61.00 |
Tamping or compacting machinery, not self-propelled |
|
8430.69.01 |
Machinery for working earth, minerals or ores, not self-propelled, nesoi |
|
8432.10.00 |
Plows for soil preparation or cultivation |
|
8432.21.00 |
Disc harrows for soil preparation or cultivation |
|
8432.29.00 |
Harrows (other than disc), scarifiers, cultivators, weeders and hoes for soil preparation or cultivation |
|
8432.31.00 |
No-till direct seeders, planters and transplanters |
|
8432.39.00 |
Seeders, planters and transplanters, nesoi |
|
8432.41.00 |
Manure spreaders |
|
8432.42.00 |
Fertilizer distributors |
|
8432.80.00 |
Agricultural, horticultural or forestry machinery for soil preparation or cultivation, nesoi; lawn or sports ground |
|
rollers |
|
|
8433.30.00 |
Haymaking machinery other than mowers |
|
8433.40.00 |
Straw or fodder balers, including pick-up balers |
|
8433.51.00 |
Combine harvester-threshers |
|
8433.52.00 |
Threshing machinery other than combine harvester-threshers |
|
8433.53.00 |
Root or tuber harvesting machines |
|
8433.59.00 |
Harvesting machinery or threshing machinery, nesoi |
|
8433.60.00 |
Machines for cleaning, sorting or grading eggs, fruit or other agricultural produce |
|
8435.10.00 |
Presses, crushers and similar machinery used in the manufacture of wine, cider, fruit juices or similar beverages |
|
8436.10.00 |
Machinery for preparing animal feeds |
|
8436.21.00 |
Poultry incubators and brooders |
|
8436.29.00 |
Poultry-keeping machinery |
|
8436.80.00 |
Agricultural, horticultural, forestry or bee-keeping machinery, nesoi |
|
8437.10.00 |
Machines for cleaning, sorting or grading seed, grain or dried leguminous vegetables |
|
8437.80.00 |
Machinery used in the milling industry or for the working of cereals or dried leguminous vegetables, other than farm |
|
type machinery |
|
|
8438.10.00 |
Bakery machinery and machinery for the manufacture of macaroni, spaghetti or similar products, nesoi |
|
8438.20.00 |
Machinery for the manufacture of confectionery, cocoa or chocolate, nesoi |
|
8438.30.00 |
Machinery for sugar manufacture, nesoi |
|
8438.40.00 |
Brewery machinery, nesoi |
|
8438.50.00 |
Machinery for the preparation of meat or poultry, nesoi |
|
8438.60.00 |
Machinery for the preparation of fruits, nuts or vegetables, nesoi |
|
8438.80.00 |
Machinery for the industrial preparation or manufacture of food or drink, nesoi |
|
8439.10.00 |
Machinery for making pulp of fibrous cellulosic material |
|
8439.20.00 |
Machinery for making paper or paperboard |
|
8439.30.00 |
Machinery for finishing paper or paperboard |
|
8441.10.00 |
Cutting machines of all kinds used for making up paper pulp, paper or paperboard |
|
8441.20.00 |
Machines for making bags, sacks or envelopes of paper pulp, paper or paperboard |
|
8441.30.00 |
Machines for making cartons, boxes, cases, tubes, drums or similar containers, other than by molding, of paper pulp, paper or paperboard |
|
8441.40.00 |
Machines for molding articles in paper pulp, paper or paperboard |
|
8441.80.00 |
Machinery for making up paper pulp, paper or paperboard, nesoi |
|
8442.30.01 |
Machinery, apparatus and equipment of heading 8442 |
|
8442.50.10 |
Printing plates |
|
8442.50.90 |
Printing type, blocks, cylinders and other printing components; blocks, cylinders and lithographic stones, prepared |
|
for printing purposes |
|
|
8444.00.00 |
Machines for extruding, drawing, texturing or cutting man-made textile materials |
|
8445.11.00 |
Carding machines for preparing textile fibers |
|
8445.12.00 |
Combing machines for preparing textile fibers |
|
8445.13.00 |
Drawing or roving machines for preparing textile fibers |
|
8445.19.00 |
Machines for preparing textile fibers, nesoi |
|
8445.20.00 |
Textile spinning machines |
|
8445.30.00 |
Textile doubling or twisting machines |
|
8445.40.00 |
Textile winding (including weft-winding) or reeling machines |
|
8445.90.00 |
Machinery for producing textile yarns nesoi; machines for preparing textile yarns for use on machines of heading 8446 or 8447 |
|
8446.10.00 |
Weaving machines (looms) for weaving fabrics of a width not exceeding 30 cm |
|
8446.21.50 |
Shuttle type power looms for weaving fabrics of a width exceeding 30 cm, but not exceeding 4.9 m |
|
8446.29.00 |
Weaving machines for weaving fabrics of a width exceeding 30 cm, shuttle type, nesoi |
|
8446.30.10 |
Shuttleless type power looms, for weaving fabrics of a width exceeding 4.9 m, nesoi |
|
8446.30.50 |
Shuttleless type weaving machines (looms), for weaving fabrics of a width exceeding 30 cm, nesoi |
|
8447.11.10 |
Circular knitting machines with cylinder diameter not exceeding 165 mm, for knitting hosiery |
|
8447.11.90 |
Circular knitting machines with cylinder diameter not exceeding 165 mm, other than for knitting hosiery |
|
8447.12.10 |
Circular knitting machines with cylinder diameter exceeding 165 mm, for knitting hosiery |
|
8447.12.90 |
Circular knitting machines with cylinder diameter exceeding 165 mm, other than for knitting hosiery |
|
8447.20.20 |
V-bed flat knitting machines, power driven, over 50.8 mm in width |
|
8447.20.30 |
V-bed flat knitting machines, nesoi |
|
8447.20.40 |
Warp knitting machines |
|
8447.20.60 |
Flat knitting machines, other than V-bed or warp; stitch-bonding machines |
|
8447.90.10 |
Braiding and lace-braiding machines |
|
8447.90.50 |
Embroidery machines |
|
8447.90.90 |
Knitting machines other than circular or flat knitting; machines for making gimped yarn, tulle, trimmings or net; machines for tufting |
|
8448.11.00 |
Dobbies and Jacquards, card reducing, copying, punching or assembling machines for use with machines of heading 8444, 8445, 8446 or 8447 |
|
8448.19.00 |
Auxiliary machinery for machines of heading 8444, 8445, 8446 or 8447, nesoi |
|
8448.31.00 |
Card clothing as parts and accessories of machines of heading 8445 or of their auxiliary machinery |
|
8448.33.00 |
Spindles, spindle flyers, spinning rings and ring travellers of machines of heading 8445 or of their auxiliary machines |
|
8448.42.00 |
Reeds for looms, healds and heald-frames of weaving machines (looms) or their auxiliary machinery |
|
8448.51.10 |
Latch needles for knitting machines |
|
8448.51.20 |
Spring-beard needles for knitting machines |
|
8448.51.30 |
Needles for knitting machines other than latch needles or spring- beard needles |
|
8448.51.50 |
Sinkers, needles and other articles used to form stitches, nesoi, for machines of heading 8447 |
|
8449.00.10 |
Finishing machinery for felt or nonwovens and parts thereof |
|
8449.00.50 |
Machinery for making felt hats; blocks for making hats; parts thereof |
|
8451.29.00 |
Drying machines for yarns, fabrics or made up textile articles, each of a dry linen capacity exceeding 10 kg |
|
8451.30.00 |
Ironing machines and presses (including fusing presses) for textile fabrics or made up textile articles |
|
8451.40.00 |
Washing, bleaching or dyeing machines for textile yarns, fabrics or made up textile articles |
|
8451.50.00 |
Machines for reeling, unreeling, folding, cutting or pinking textile fabrics |
|
8451.80.00 |
Machinery for the handling of textile yarns, fabrics or made up textile articles, nesoi |
|
8452.21.10 |
Sewing machines specially designed to join footwear soles to uppers, automatic |
|
8452.21.90 |
Sewing machines, automatic, nesoi |
|
8452.29.10 |
Sewing machines, other than automatic, specially designed to join footwear soles to uppers |
|
8452.29.90 |
Sewing machines, other than automatic, nesoi |
|
8453.10.00 |
Machinery for preparing, tanning or working hides, skins or leather |
|
8453.20.00 |
Machinery for making or repairing footwear |
|
8453.80.00 |
Machinery, nesoi, for making or repairing articles of hides, skins or leather |
|
8454.10.00 |
Converters of a kind used in metallurgy or in metal foundries |
|
8454.20.00 |
Ingot molds and ladles, of a kind used in metallurgy or in metal foundries |
|
8454.30.00 |
Casting machines, of a kind used in metallurgy or in metal foundries |
|
8455.10.00 |
Metal-rolling tube mills |
|
8455.21.00 |
Metal-rolling mills, other than tube mills, hot or combination hot and cold |
|
8455.22.00 |
Metal-rolling mills, other than tube mills, cold |
|
8455.30.00 |
Rolls for metal-rolling mills |
|
8456.11.10 |
Machine tools operated by laser, for working metal |
|
8456.11.70 |
Machine tools operated by laser, of a kind used solely or principally for manufacture of printed circuits |
|
8456.11.90 |
Machine tools operated by laser, nesoi |
|
8456.12.10 |
Machine tools operated by light or photon beam processes, for working metal |
|
8456.12.70 |
Machine tools operated by light or photon beam processes, of a kind used solely or principally for the manufacture of printed circuits |
|
8456.12.90 |
Machine tools operated by light or photon beam processes, nesoi |
|
8456.20.10 |
Machine tools operated by ultrasonic processes, for working metal |
|
8456.20.50 |
Machine tools operated by ultrasonic processes, other than for working metal |
|
8456.30.10 |
Machine tools operated by electro-discharge processes, for working metal |
|
8456.30.50 |
Machine tools operated by electro-discharge processes, other than for working metal |
|
8456.40.10 |
Machine tools operated by plasma arc process, for working metal |
|
8456.40.90 |
Machine tools operated by plasma arc process, other than for working metal |
|
8456.50.00 |
Water-jet cutting machines |
|
8456.90.31 |
Machine tools operated by electro-chemical or ionic-beam processes, for working metal |
|
8456.90.71 |
Machine tools operated by electro-chemical or ionic-beam processes, other than for working metal |
|
8457.10.00 |
Machining centers for working metal |
|
8457.20.00 |
Unit construction machines (single station), for working metal |
|
8457.30.00 |
Multistation transfer machines for working metal |
|
8458.11.00 |
Horizontal lathes (including turning centers) for removing metal, numerically controlled |
|
8458.19.00 |
Horizontal lathes (including turning centers) for removing metal, other than numerically controlled |
|
8458.91.10 |
Vertical turret lathes (including turning centers) for removing metal, numerically controlled |
|
8458.91.50 |
Lathes (including turning centers), other than horizontal or vertical turret lathes, for removing metal, numerically |
|
controlled |
|
|
8458.99.10 |
Vertical turret lathes (including turning centers) for removing metal, other than numerically controlled |
|
8458.99.50 |
Lathes (including turning centers), other than horizontal or vertical turret lathes, for removing metal, other than numerically controlled |
|
8459.10.00 |
Way-type unit head machines for drilling, boring, milling, threading or tapping by removing metal, other than lathes of heading 8458 |
|
8459.21.00 |
Drilling machines, numerically controlled, nesoi |
|
8459.29.00 |
Drilling machines, other than numerically controlled, nesoi |
|
8459.31.00 |
Boring-milling machines, numerically controlled, nesoi |
|
8459.39.00 |
Boring-milling machines, other than numerically controlled, nesoi |
|
8459.41.00 |
Boring machines, numerically controlled, nesoi |
|
8459.49.00 |
Boring machines, not numerically controlled, nesoi |
|
8459.51.00 |
Milling machines, knee type, numerically controlled, nesoi |
|
8459.59.00 |
Milling machines, knee type, other than numerically controlled, nesoi |
|
8459.61.00 |
Milling machines, other than knee type, numerically controlled, nesoi |
|
8459.69.00 |
Milling machines, other than knee type, other than numerically controlled, nesoi |
|
8459.70.40 |
Other threading or tapping machines, numerically controlled |
|
8459.70.80 |
Other threading or tapping machines nesoi |
|
8460.12.00 |
Flat-surface grinding machines, numerically controlled |
|
8460.19.01 |
Flat-surface grinding machines, not numerically controlled |
|
8460.22.00 |
Centerless grinding machines, numerically controlled |
|
8460.23.00 |
Other cylindrical grinding machines, numerically controlled |
|
8460.24.00 |
Other grinding machines, numerically controlled |
|
8460.29.01 |
Other grinding machines, other than numerically controlled |
|
8460.31.00 |
Sharpening (tool or cutter grinding) machines for working metal or cermets, numerically controlled |
|
8460.39.00 |
Sharpening (tool or cutter grinding) machines for working metal or cermets, other than numerically controlled |
|
8460.40.40 |
Honing or lapping machines for working metal or cermets, numerically controlled |
|
8460.40.80 |
Honing or lapping machines for working metal or cermets, other than numerically controlled |
|
8460.90.40 |
Other machine tools for deburring, polishing or otherwise finishing metal or cermets, nesoi, numerically controlled |
|
8460.90.80 |
Other machine tools for deburring, polishing or otherwise finishing metal or cermets, nesoi, other than numerically |
|
controlled |
|
|
8461.20.40 |
Shaping or slotting machines for working by removing metal or cermets, numerically controlled |
|
8461.20.80 |
Shaping or slotting machines for working by removing metal or cermets, other than numerically controlled |
|
8461.30.40 |
Broaching machines for working by removing metal or cermets, numerically controlled |
|
8461.30.80 |
Broaching machines for working by removing metal or cermets, other than numerically controlled |
|
8461.40.10 |
Gear cutting machines for working by removing metal or cermets |
|
8461.40.50 |
Gear grinding or finishing machines for working by removing metal or cermets |
|
8461.50.40 |
Sawing or cutting-off machines for working by removing metal or cermets, numerically controlled |
|
8461.50.80 |
Sawing or cutting-off machines for working by removing metal or cermets, other than numerically controlled |
|
8461.90.30 |
Machine-tools for working by removing metal or cermets, nesoi, numerically controlled |
|
8461.90.60 |
Machine-tools for working by removing metal or cermets, nesoi, other than numerically controlled |
|
8462.11.00 |
Hot forming machines for forging, die forging (including presses) and hot hammers, closed die forging machines |
|
8462.19.00 |
Other hot forming machines for forging, die forging (including presses) and hot hammers (other than closed die forging machines), nesoi |
|
8462.22.00 |
Profile forming machines |
|
8462.23.00 |
Numerically controlled press brakes |
|
8462.24.00 |
Numerically controlled panel benders |
|
8462.25.00 |
Numerically controlled roll forming machines |
|
8462.26.00 |
Other numerically controlled bending, folding, straightening or flattening machines (o/t press brakes, panel benders, |
|
roll forming machines) |
|
|
8462.29.00 |
Other bending folding straightening or flattening machines (other than numerically controlled or profile forming |
|
machines), nesoi |
|
|
8462.32.10 |
Numerically controlled sitting lines and cut-to-length lines |
|
8462.32.50 |
Sitting lines and cut-to-length lines (other than numerically controlled), nesoi |
|
8462.33.00 |
Numerically controlled shearing machines |
|
8462.39.00 |
Shearing machines (other than numerically controlled), nesoi |
|
8462.42.00 |
Numerically controlled punching, notching or nibbling machines (excluding presses) for flat products |
|
8462.49.00 |
Other punching, notching or nibbling machines (excluding presses) for flat products, other than numerically controlled |
|
8462.51.00 |
Numerically controlled machines for working tube, pipe, hollow section and bar (excluding presses) |
|
8462.59.00 |
Other machines for working tube, pipe, hollow section and bar (excluding presses), other than numerically controlled |
|
8462.61.40 |
Hydraulic presses, numerically controlled |
|
8462.61.80 |
Hydraulic presses, not numerically controlled |
|
8462.62.40 |
Numerically controlled mechanical cold metal working presses |
|
8462.62.50 |
Other mechanical cold metal working presses, other than numerically controlled |
|
8462.63.40 |
Numerically controlled cold metal working servo-presses |
|
8462.63.80 |
Other cold metal working servo-presses, other than numerically controlled |
|
8462.69.40 |
Numerically controlled other cold metal working presses, nesoi |
|
8462.69.80 |
Other cold metal working presses, other than numerically controlled, nesoi |
|
8462.90.40 |
Other numerically controlled machines tools for working metal, nesoi |
|
8462.90.80 |
Other machines tools for working metal, other than numerically controlled, nesoi |
|
8463.10.00 |
Draw-benches for bars, tubes, profiles, wire or the like, for working metal or cermets, without removing material |
|
8463.20.00 |
Thread rolling machines for working metal or cermets, without removing material |
|
8463.30.00 |
Machines for working wire of metal or cermets, without removing material |
|
8463.90.00 |
Machine tools for working metal or cermets, without removing material, nesoi |
|
8464.10.01 |
Sawing machines for working stone, ceramics, concrete, asbestos- cement or like mineral materials or for cold working glass |
|
8464.20.01 |
Grinding or polishing machines for working stone, ceramics, concrete, asbestos-cement or like mineral materials, or glass, nesoi |
|
8464.90.01 |
Machine tools for working stone, ceramics, concrete, asbestos- cement or like mineral materials or for cold working glass, nesoi |
|
8465.10.00 |
Machines for working certain hard materials which can carry out different types of machining operations w/o tool change between operations |
|
8465.20.10 |
Machine centers for sawing, planing, milling, molding, grinding, sanding, polishing, drilling or mortising |
|
8465.20.50 |
Machine centers for bending or assembling |
|
8465.20.80 |
Machine centers, nesoi |
|
8465.91.00 |
Sawing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials |
|
8465.92.00 |
Planing, milling or molding (by cutting) machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials |
|
8465.93.00 |
Grinding, sanding or polishing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials |
|
8465.94.00 |
Bending or assembling machines for working wood, cork, bone hard rubber, hard plastics or similar hard materials |
|
8465.95.00 |
Drilling or mortising machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials |
|
8465.96.00 |
Splitting, slicing or paring machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials |
|
8465.99.02 |
Machine tools for working wood, cork, bone, hard rubber, hard plastics and similar hard materials, nesoi |
|
8468.20.10 |
Gas-operated machinery, apparatus and appliances, hand-directed or -controlled, used for soldering, brazing, welding or tempering, nesoi |
|
8468.20.50 |
Gas-operated machinery, apparatus and appliances, not hand- directed or -controlled, used for soldering, brazing, |
|
welding or tempering, nesoi |
|
|
8468.80.10 |
Machinery and apparatus, hand-directed or -controlled, used for soldering, brazing or welding, not gas-operated |
|
8468.80.50 |
Machinery and apparatus other than hand-directed or -controlled, used for soldering, brazing or welding, not gas- operated |
|
8474.10.00 |
Sorting, screening, separating or washing machines for earth, stones, ores or other mineral substances in solid form |
|
8474.20.00 |
Crushing or grinding machines for earth, stones, ores or other mineral substances |
|
8474.31.00 |
Concrete or mortar mixers |
|
8474.32.00 |
Machines for mixing mineral substances with bitumen |
|
8474.39.00 |
Mixing or kneading machines for earth, stones, ores or other mineral substances, nesoi |
|
8474.80.00 |
Machinery for agglomerating, shaping or molding solid mineral fuels, or other mineral products; machines for |
|
forming sand foundry molds |
|
|
8475.10.00 |
Machines for assembling electric or electronic lamps, tubes or flashbulbs, in glass envelopes |
|
8475.21.00 |
Machines for making glass optical fibers and preforms thereof |
|
8475.29.00 |
Machines for manufacturing or hot working glass or glassware, nesoi |
|
8477.10.30 |
Injection-molding machines for manufacturing shoes of rubber or plastics |
|
8477.10.40 |
Injection-molding machines for use in the manufacture of video laser discs |
|
8477.10.90 |
Injection-molding machines of a type used for working or manufacturing products from rubber or plastics, nesoi |
|
8477.20.00 |
Extruders for working rubber or plastics or for the manufacture of products from these materials, nesoi |
|
8477.30.00 |
Blow-molding machines for working rubber or plastics or for the manufacture of products from these materials |
|
8477.40.01 |
Vacuum-molding and other thermoforming machines for working rubber or plastics or for manufacture of products |
|
from these materials, nesoi |
|
|
8477.51.00 |
Machinery for molding or retreading pneumatic tires or for molding or otherwise forming inner tubes |
|
8477.59.01 |
Machinery for molding or otherwise forming rubber or plastics other than for molding or retreading pneumatic tires, nesoi |
|
8477.80.01 |
Machinery for working rubber or plastics or for the manufacture of products from these materials, nesoi |
|
8478.10.00 |
Machinery for preparing or making up tobacco, nesoi |
|
8479.10.00 |
Machinery for public works, building or the like, nesoi |
|
8479.20.00 |
Machinery for the extraction or preparation of animal or fixed vegetable fats or oils, nesoi |
|
8479.30.00 |
Presses for making particle board or fiber building board of wood or other ligneous materials, and mach. for treat. wood or cork, nesoi |
|
8479.40.00 |
Rope- or cable-making machines nesoi |
|
8479.50.00 |
Industrial robots, nesoi |
|
8479.81.00 |
Machines and mechanical appliances for treating metal, including electric wire coil-winders, nesoi |
|
8479.82.00 |
Machines for mixing, kneading, crushing, grinding, screening, sifting, homogenizing, emulsifying or stirring, nesoi |
|
8479.83.00 |
Cold isostatic presses, nesoi |
|
8479.89.83 |
Machines for the manufacture of optical media |
|
8479.89.92 |
Automated electronic component placement machines for making printed circuit assemblies |
|
8479.89.95 |
Other machines and mechanical appliances having individual functions, not specified or included elsewhere in chapter 84, nesoi |
|
8486.10.00 |
Machines and apparatus for the manufacture of boules or wafers |
|
8486.20.00 |
Machines and apparatus for the manufacture of semiconductor devices or electronic integrated circuits |
|
8486.30.00 |
Machines and apparatus for the manufacture of flat panel displays |
|
8486.40.00 |
Machines and apparatus for the manufacture of masks and reticles and for the assembly of electronic integrated circuits |
|
8514.11.00 |
Hot isostatic presses |
|
8514.19.00 |
Other resistance heated industrial or laboratory furnaces and ovens, other than hot isostatic presses |
|
8514.20.40 |
Industrial or laboratory microwave ovens for making hot drinks or for cooking or heating food |
|
8514.20.60 |
Industrial or laboratory microwave ovens, nesoi |
|
8514.20.80 |
Industrial or laboratory furnaces and ovens (other than microwave) functioning by induction or dielectric loss |
|
8514.31.10 |
Electron beam furnaces for making printed circuits or printed circuit assemblies |
|
8514.31.90 |
Electron beam furnaces, other than for making printed circuits or printed circuit assemblies |
|
8514.32.10 |
Plasma and vacuum arc furnaces for making printed circuits or printed circuit assemblies |
|
8514.32.90 |
Plasma and vacuum arc furnaces, other than for making printed circuits or printed circuit assemblies |
|
8514.39.10 |
Other industrial furnaces and ovens for making printed circuits or printed circuit assemblies |
|
8514.39.90 |
Other industrial or laboratory electric industrial or laboratory furnaces and ovens nesoi |
|
8514.40.00 |
Industrial or laboratory induction or dielectric heating equipment nesoi |
|
8515.11.00 |
Electric soldering irons and guns |
|
8515.19.00 |
Electric brazing or soldering machines and apparatus, other than soldering irons and guns |
|
8515.21.00 |
Electric machines and apparatus for resistance welding of metal, fully or partly automatic |
|
8515.29.00 |
Electric machines and apparatus for resistance welding of metal, other than fully or partly automatic |
|
8515.31.00 |
Electric machines and apparatus for arc (including plasma arc) welding of metals, fully or partly automatic |
|
8515.39.00 |
Electric machines and apparatus for arc (including plasma arc) welding of metals, other than fully or partly automatic |
|
8515.80.00 |
Electric welding apparatus nesoi,and electric machines and apparatus for hot spraying metals or sintered metal carbides |
|
8543.30.20 |
Electrical machines and apparatus for electroplating, electrolysis, or electrophoresis for making printed circuits |
|
8543.30.90 |
Other electrical machines and apparatus for electroplating, electrolysis, or electrophoresis |
|
8543.70.20 |
Physical vapor deposition apparatus, nesoi |
|
8543.70.60 |
Electrical machines and apparatus nesoi, designed for connection to telegraphic or telephonic apparatus, instruments or networks |
|
8543.70.71 |
Electric luminescent lamps |
|
8543.70.97 |
Plasma cleaner machines that remove organic contaminants from electron microscopy specimens and holders |
|
8543.70.98 |
Other electrical machines and apparatus, having individual functions, nesoi |
附件C：拟议的太阳能制造设备排除情况
请向上滑动阅览
|
Annex C |
|
Exclusion Product Description |
|
[1] Silicon growth furnaces, including Czochralski crystal growth furnaces, designed for growing monocrystalline silicon ingots (boules) of a mass exceeding 700 kg, for use in solar wafer manufacturing (described in statistical reporting number 8486.10.0000). |
|
[2] Band saws designed for cutting or slicing cylindrical monocrystalline silicon ingots (boules) of a mass exceeding 700 kg into square or rectangular ingots (boules), for use in solar wafer manufacturing (described in statistical reporting number 8486.10.0000). |
|
[3] Machines designed to align and adhere monocrystalline silicon ingots (boules) of a mass exceeding 400 kg to plastic support boards on metal mounting plates to provide support during diamond wire sawing, for use in solar wafer manufacturing (described in statistical reporting number 8486.10.0000). |
|
[4] Diamond wire saws designed for cutting or slicing silicon ingots (boules) of a mass exceeding 400 kg into solar wafers of a thickness not exceeding 200 micrometers (described in statistical reporting number 8486.10.0000). |
|
[5] Wire guide roller machines, presented with diamond wire saws designed for slicing monocrystalline silicon ingots (boules) of a mass exceeding 400 kg into solar wafers of a thickness not exceeding 200 micrometers, all of the foregoing for use in solar wafer manufacturing (described in statistical reporting number 8486.10.0000). |
|
[6] Coolant fluid recycling machines, presented with diamond wire saws designed for slicing monocrystalline silicon ingots (boules) of a mass exceeding 400 kg into solar wafers of a thickness not exceeding 200 micrometers, all of the foregoing for use in solar wafer manufacturing (described in statistical reporting number 8486.10.0000). |
|
[7] Degumming machines designed to remove adhesives from solar wafers (described in statistical reporting number 8486.10.0000). |
|
[8] Texturing and cleaning machines designed to repair, clean, and texture the solar wafer substrate, whether or not containing automation equipment for transferring solar wafers from one process station to the next, for use in solar wafer manufacturing (described in statistical reporting number 8486.20.0000). |
|
[9] Thermal diffusion quartz-tube furnaces and boat loading machines, designed to diffuse dopant impurities into square or rectangular silicon wafers, for use in solar cell manufacturing (described in statistical reporting number 8486.20.0000). |
|
[10] Plasma enhanced chemical vapor deposition machines designed to deposit amorphous or nanocrystalline layers on one or both surfaces of a solar wafer, whether or not containing automation equipment for transferring solar wafers from one process station to the next, for use in solar cell manufacturing (described in statistical reporting number 8486.20.0000). |
|
[11] Physical vapor deposition (PVD) machines, designed to deposit a thin film of transparent conducting oxide on one or both surfaces of a solar wafer, whether or not containing automation equipment for transferring solar wafers from one process station to the next, for use in solar cell manufacturing (described in statistical reporting number 8486.20.0000). |
|
[12] Screen printing line machines, including sintering furnaces for printing conducting contacts on both surfaces of a solar wafer, whether or not containing automation equipment for transferring solar wafers from one process station to the next, and whether or not containing equipment for solar cell testing, for use in solar cell manufacturing (described in statistical reporting number 8486.20.0000). |
|
[13] Cell interconnection machines designed to electrically solder solar cells to each other to form a complete electrical circuit, for use in solar module manufacturing (described in statistical reporting number 8486.20.0000). |
|
[14] Module encapsulant preparation machines designed for encapsulant cutting and placement, butyl dispensing equipment, and equipment for the transport of encapsulant materials, all the foregoing for use in solar module manufacturing (described in statistical reporting number 8486.20.0000). |
|
[15] Machines designed to laminate an interconnected cell string and to attach junction boxes, all the foregoing for use in solar module manufacturing (described in statistical reporting number 8486.20.0000). |
|
[16] Frame attachment machines designed for attaching metal frames to the perimeter or rear surface of solar modules (described in statistical reporting number 8486.20.0000). |
|
[17] Machines designed for transporting polysilicon material to growth furnaces and machines designed for transporting monocrystalline ingots (boules) and wafers throughout the solar wafer manufacturing process, including machines for loading or unloading solar wafers during the diamond wire slicing process (described in statistical reporting number 8486.40.0030). |
|
[18] Machines designed for lifting, handling, loading, or unloading of solar wafers of a thickness not exceeding 200 micrometers, for use in solar wafer manufacturing (described in statistical reporting number 8486.40.0030). |
|
[19] Machines designed for lifting, handling, loading, or unloading in the assembly of solar modules (described in statistical reporting number 8486.40.0030). |